Each individual domestic window shutter can be manufactured up to a width of 3.5m or a total of 9 square metres.
All exterior window roller shutters are enclosed in a various number of different size aluminium pelmet boxes ranging from 137mm to 230mm. Please advise should you want all headboxes to match standard is to make to the smallest size allowable based on the height of the window.
The axle can be manufactured from 50mm diameter aluminium round tube, 40mm or 60mm diameter galvanised hexagonal tube or 60mm diameter aluminium hexagonal tube depending on the application and shall be fitted with fully sealed steel ball bearings.
The curtain is manufactured by interlocking 40mm flat, 42mm curved, 55mm curved roll-formed, polyurethane foam-filled slats or 40mm extruded aluminium slats to form a continuous hinge. Each joining slat is fitted with a moulded nylon end clip to prevent lateral movement and provide a smooth and quiet operation inside the side guides.
The bottom rail of the shutter is manufactured from an extruded aluminium section 65mm x 10mm with the option to add a locking device. The weather seal is fitted as standard.
When the shutter is completely closed the design allows the shutter to lock automatically.
For added security, the bottom rail can house slide locks within the extrusion.
This operates 2 x 10mm x 2mm aluminium flat bars which, when in the locked position, secure into the side guides on both sides of the opening.
Key locks can also be fitted as an option.
Extruded aluminium section 53mm deep x 22mm wide and 72mm deep + 25mm side for shutters over 3m. Weather seals fitted as standard.
Products specifications can change without notice it is advised to call to confirm prior to ordering.